Can laser cutting machines cut aluminum plates? If such a problem were to occur early on, it would indeed result in unsatisfactory cutting due to the reflection of the aluminum plate, and adjusting the parameters would be somewhat difficult. However, the current fiber laser cutting machine has become more powerful, and the aluminum plate can be cut many years ago, and the incision is still very smooth without burrs and slag.

Can the aluminum plate laser cutting machine cut?

As we all know, the cutting thickness is calculated based on the power. For aluminum plates, the cutting thickness of a 6000W laser cutting machine is about 20mm, while that of a 3000W laser cutting machine is also about 8mm. Of course, this is a more suitable cutting thickness. The principle of laser cutting is to gather a high-power beam of light to reach high temperature, causing the material to melt and vaporize. In addition, a strong airflow blows away the high-temperature dissolved material, which is then used to cut the metal material. It should be noted that cutting aluminum plates requires the use of nitrogen gas.

The characteristics of aluminum plate cutting:

1. Low cutting loss: When cut well, it is generally around 0.1 millimeters, resulting in low loss and cost savings.

2. Smoothness of the cut surface: Generally, aluminum plates that are not too thick will not have burrs or slag.

3. Material cutting has small thermal deformation: the speed of light is concentrated, and the local temperature rapidly increases during cutting, so the heat transferred to other parts has decreased, and the material deformation rate is also very small.

4. Cutting cost: Relatively speaking, the cutting cost of fiber laser cutting machines is still relatively low compared to other cutting technologies.

Can the aluminum plate laser cutting machine cut?

When cutting aluminum sheet materials, attention should be paid to protection and protective glasses should be worn, as they are high reflective materials to prevent eye injuries. It's actually about the issue of aluminum plate cutting. Don't take it seriously if you hear about damaging the laser. In fact, the cutting process consists of a laser and a cutting head, so the most easily damaged part is the reflective lens. When cutting aluminum, it's important to pay attention to the cost issue.